Version History (release notes)

Actual Updater 7.0 - 2026 November 16

Configuration Tool is now multilingual - available in Chinese, Czech, Dutch, English, French, German, Italian, Japanese, Polish, Portuguese, Russian, Spanish.
Added: Update Method "Run Command" - execute a custom command for updating.
Added: security feature "Verify Hash" - ensure that the downloaded file has not been modified, corrupted, or tampered, before proceeding with the update.
Added: security feature "File Must have a valid Authenticode signature" (for Update Methods: "Download Setup and Run", and "Download Main Executable only") - if the downloaded file is not signed with a valid certificate, the update will fail.
After a successful update, write the new version number to both locations: file "Updater.ini" and Registry (if a GUID is specified); Previously, the new version was updated only on one location (depending on the option "Get currently installed version from"): either Updater.ini or Registry.
If Updater is elevated (run as administrator), then don't prompt to open the app after updating; to prompt, add parameter -PromptOpenIfAdmin
see the full list at actualupdater.com

Actual Updater 6.1 - 2026 April 14

Custom Actions: Run commands before and after update: add to the Update Infor File, under [Update]: RunBeforeUpdate=, RunAfterUpdate=. Example: stop service before update: RunBeforeUpdate=sc.exe stop "ServiceName". Available parameters for this feature: -RunCmdAdmin, -RunCmdNoWait, -RunCMDAfterSuccessUpdate
Improved Update Method: Download ZIP and Unpack: 2 attempts to extract a file before showing error message; show Retry button in Force Update mode (/F)
Improved Download function: if unable to connect or error 403 (forbidden), then change User Agent to a browser similar, and try again automatically
Improved Function to detect running process: if full file path is specified (example, C:\Dir\App.exe), then only this file is checked. Previously, any file with this name "App.exe" is checked. To not use this feature, add parameter -PRnoPath
Added: parameters:
	-NoCheckAttr - by default, updater checks the main exe attribute, and if it is Read Only, then change to Normal. Add this parameter to not perform this action.
	-MsgInSilentUpdate - show error messages when using the feature "Install updates silently"
	-NoSilentZipForceClose - by default, when using the feature "Install updates silently", running exe files are closed automatically. Add this parameter to not perform this action.
Added support for URL without protocol (example.com/file.txt).
Config Tool: added feature to get CRC32 for a file.
Minor fixes.

Actual Updater 6.0 - 2026 March 10

Added: new version Actual Downloader 4.0
Added: CRC32 check: add parameter -CRC32[value] (for example -CRC32[12345678]) to ensure the file is not damaged and downloaded completely. Otherwise, show error (exit code 9) - "CRC32 check failed: the file may not have been fully downloaded"
Added: support for URL without protocol (protocol-relative), for example "//website.com/file.txt"
Added: if it fails to run the downloaded file, then open its location, or show message "The file was downloaded successfully, but was then deleted (possibly by your security software)"
Added: support for Unicode characters in the What's New text
Added: exit code 8 - cannot update (download failed or access denied)
Added: when using Product GUID in "Get Version from Registry", then write "VersionMajor" and "VersionMinor" to the Registry during updating
Added: information about server response codes: 400 (Bad Request), 401 (Not Authorised), 403 (Forbidden), 404 (File Not Found), 500 (Internal Server Error), 503 (Service Unavailable). To not check, add parameter -noCheckResponce
Added: ability to use parameters for changing interface in the Update Info File
Added: variables $appcurver (currently installed version) and $appnewver (new version). Can be used in the New Version URL
Added: ability to use a web page for the What's New info box (beta feature, supports simple html documents). Add "WhatsNewURL" and specify URL
Added: info logo scaling (so it does not look smaller)
Improved: Update method "Replace Main Exe only"
Improved: do not fully download an update info file, if there is not updates
Improved: message (prompting to close the main exe) is no TopMost
Config Tool: added the ability to use prohibited characters for Windows files (\/:*?"<>|) in Product Name. Little improvements.
Fixed: when changing Updater Options - the update frequency and "Install updates silently", the last one does not take effect
Fixed some minor bugs
Added: parameters:
	-IgnoreError - Show "no updates available" instead of connection errors
	-HTML - ability to use HTML tags for the What's New text
	-SilentParam[] - specify a parameter to use the silent mode for installation
	-noPromptOpenIfUpdated - do not prompt to open the app after a successful update
	-ForceElevate - always elevate the update process
	-NoCaption - hide title bar
	-LargeDialog3 - set window size to 600x600px
	-DarkTheme - use the dark theme
	-SysTheme - use the system theme
	-FontColor[] - change font color
	-Color[] - background color for the New Dialog box
	-Color2[] - background color the What's New section
	-FontColor2[] - font color for the What's New section
	-DestExe - for the destination file use AppName.exe
	-DestZip - for the destination file use AppName.zip
	-SimpleVersioning - do not use Semantic versioning
	-noParseVer	- do not replace characters "," and "-" with "." in version string
	-ZipUpdaterDir - for Update Method "Download ZIP and Unpack" - for destination use the Updater.exe folder (default is the main exe folder)
	-ZipParentDir - for Update Method "Download ZIP and Unpack" - for destination use the parent folder
	-RunSetupAdmin - for Update Method "Download Setup and Run" - run the file as administrator

Actual Updater 5.4 - 2024 October 14

Added: New Downloader 3.7.
Added the ability to update later after the Main Exe is closed, in case if it is running (option "Update when I exit AppName").
Added the option for the "Check for Updates on App Launch" feature - do not launch Main Executable file if the update is available: first ask the user to update, if the user declines it, launch Main Exe file.	
Added new exit codes: 6 - canceled by user; 7 - cannot extract files from ZIP.
Added the ability to specify the update size.
Added parameters: -noSuccessUpdateMsg, -noMsgBackgroundProcess, -LaunchAppAfterCheck, -HideUpdateLater, -InstallSilently, -ForceUpdate, -IfSilentForceClose, -WhiteWhatsNew, -NoBorderWhatsNew, -NoLogo, -SimpleDialog (previously was -olddialog), -AllowChangeOptions (previously was -AllowChange).
Improved: Do not offer to enable the auto update feature, if the feature "Check for Updates on App Launch" is already enabled.
Improved: Feature "Extract Zip": if the extracting file is an EXE file and it is running, then prompt the user to close it; or if use the parameter -ForceClose then automatically terminate the file; the ability to continue extraction if some file cannot be extracted.
Improved: Default width of the New Dialog is 450px. (was 402px.).	
Other improvements.
Fixed minor bugs.

Actual Updater 5.3 - 2024 May 18

Added "Update Method": Open Link in Browser, Download Setup and Run, Download Main Executable only, Download ZIP and Unpack.
Added response code check for the Update URL - if "404" then "Page Not Found" message appears.
Added parameters to use "Get Current Version from": -getfromreg (get from Registry using GUID), -getfromini (get from INI file).
Added parameters to use Update Method: -method0 (Open Link in Browser), -method1 (Download Setup and Run), -method2 (Download Main Executable only), -method3 (Download ZIP and Unpack).
Fixed minor bugs.	

Actual Updater 5.2 - 2024 March 12

Added: Support for Semantic Versioning.
Added: New Downloader 3.6.
Improved: On systems with multiple monitors, the program is displayed on the current monitor. To show on the primary monitor, add parameter -nocurmon.
Improved: The main dialog (Product Details) is now hidden when displaying messages, so it won't override smaller apps.
Improved: Product configuration files (settings and release notes) are moved to the App subdirectory of the Actual Updater folder in %AppData%.
Fixed bug: In multi monitors systems, a dialog box (New version is available, with release notes) appers on the primary monitor, not the current monitor (the user is currently working on).
Fixed bug: empty strings in non-English version.
Fixed minor bugs.	

Actual Updater 5.1 - 2024 January 12

Added: New Downloader 3.5.
Fixed minor bugs.

Actual Updater 5.0 - 2023 August 20

Improved the feature "Install Updates Silently" via Task Scheduler - task is created with the "RunLevel" option set to "HighestAvailable" - no UAC dialog will be shown; if the main executable is running (and parameter '-forceclose' is not used), the updater will wait until it is closed.
Improved the feature "Force Update" (command-line parameter /F) - can be used with /S (silently download new version, then launch it in normal mode); /Z (silently download new version, then launch it in silent mode '/S').
Improved: if an update is available, but the user declines it, than the program returns an exit code 0 (previously was 5; add -exitcode5 to return 5 in this case).
Added: Checking if the main executable is running before performing an update, and prompting the user to close it (to automatically close the file, use parameter -forceclose).
Added ability to specify release notes in the Update Info File as one string (0=Added new feature %n Fixed bugs).
Added ability to specify the bitness of Registry for GetRegVal function - add 32 or 64 at the beginning of registry key (64HKEY...).
Added Product Edition.
Added parameters: -LWait (for "Check for Updates on App Launch" - updater will check for updates after the main exe is closed); -AppEdition (use appname + appedition for registry entries); -HighestLevel, -noHighestLevel (sets "HighestAvailable" for "RunLevel"); -unknownlevel (if you don't know how the app is installed - for current user or all users, use this param to auto detect the install mode); -hidestartup; -hidemonth; -notifybrowser (show a message "The download link will be opened in your default browser.").
Added: URL Parameters can be specified in the Update Info file (add URLParameters= under the Update section).
Added support for long paths (more than 256 characters).
Added new languages: Japanese, Portuguese.
Fixed minor bugs.

See previous versions